SPC/BAC 1.5 Upper Control Arm
SPC/BAC 1.5: a budget-friendly adjustable upper control arm for Mopar muscle cars.
SPC/BAC 1.5: a budget-friendly adjustable upper control arm for Mopar muscle cars.
Our exclusive SPC 2.0 forged upper control arm for A, B and E-body Mopars. Delrin mount bushings, a 0.5″ taller ball joint, on-car caster and camber adjustment with no eccentrics, and up to 7° positive caster. Sold as a pair.
BAC exclusive Delrin pivot and bushing package for Mopar B- and E-body lower control arms. Quiet, precise and long lasting, with no need to grease again and again.
BAC exclusive Delrin pivot and bushing package for Mopar A-body lower control arms. Quiet, precise and long lasting, with no need to grease again and again.
QA1 tubular upper control arms with up to 4.5 degrees of positive caster in most cases. Available for Early A, A, B and E bodies.
Lower control arm pivots for B and E-body Mopars, made for our Delrin bushings so no shells are needed. Rockwell tested and designed to bend, not break. Will not fit B-bodies after 1972.
Lower control arm pivots for A-body Mopars, made for our Delrin bushings so no shells are needed. Rockwell tested and designed to bend, not break.
Most customers order the A-Body Pivot and Bushing Package, which includes these pivots and our Delrin bushings.
Delrin lower control arm bushings for Mopars: stiffer and quieter than polyurethane, with very little deflection under load. Sold in pairs. Use with the inner shells, or with our BAC lower control arm pivots, which need no shells.
Weld-in reinforcement plates for Mopar lower control arms (pair). They stop the arms flexing under modern torsion bar and sway bar rates.
A complete, matched front suspension package for A, B and E-body Mopars: double-adjustable upper control arms with taller ball joints, torsion bars, adjustable monotube shocks, Delrin lower control arm pivots, adjustable strut rods, roller idler arm, 11/16″ tie rods and a hollow sway bar. Kits start at $2,499; call us to configure yours.